DIY CO2 Laser Cutting Machine to Make a Warm Night Light

Introduction

Welcome to the laser cutting night light production course! Good-Laser will teach you the basic application of laser cutting technology and use DIY CO2 laser cutting machine to make a warm night light. Whether you are a DIY enthusiast, a design student, or a friend who is interested in the combination of technology and art, you can find fun and a sense of accomplishment here.

Prepare materials

Hardware: Good-Laser Light 530 laser cutting machine, computer, workbench, vacuum cleaner, safety glasses

Software: Good-Laser LightMaker cutting software

Materials: 3mm basswood, night light drawing, LED light

Before starting work

Confirm that the laser is correct and the lens is clean

Make sure the exhaust fan is working properly

Make sure air assist is turned on

Step 1: Import the file into the Good-Laser LightMaker cutting software and adjust the size, position and settings. Check to make sure everything is working properly.

Step 2: Set processing parameters and cutting path

Step 3: Focus on cutting the wood board

To focus, there are two options:

Auto focus: Click the [Auto] button in the operation panel, click to find focus, click [Border] to determine the processing range after auto focus, and click [Start] to process after confirmation.

If you prefer manual focus: Click the [Manual] button in the operation panel, then click the up, down, left, and right buttons to move the laser head to the appropriate position, and click the [Location] button to determine the starting point of the processing.

Step 4: Remove the cut parts after processing

After processing, press the pop-up platform to remove the workpiece

Step 5: Complete splicing assembly

Step 6: Install the light source

· Install the LED light bar or lamp beads into the lamp body and connect the USB power cord.

· Test the lighting effect and adjust the position of the light source for uniform lighting.

Come and try it!

We showed the design of a warm night light, but creativity is endless. You can use Henghao laser equipment to create any image or pattern you like. Laser technology makes DIY more convenient and also gives wings to your creativity. Whether as a gift or as a decoration at home, this night light will bring warmth and unique memories.

If you like this project, you can pay more attention to our website www.good-laseredu.com, where there are more interesting projects. Thanks for reading!