Laser Cutter for Education Cutting and Engraving DIY Voice-Controlled Desk Lamp

Introduction

Welcome to the laser cutter for education cutting and engraving DIY voice-controlled desk lamp! This course is designed to use the Good-Laser Light 530 for practical operation. This course will guide you to use laser cutting technology and voice-controlled electronic components to make a practical and beautiful voice-controlled desk lamp by yourself. Through this process, you will experience all-round creation from design to electronic assembly, and feel the charm of the combination of technology and traditional craftsmanship.

Prepare materials

Hardware: Good-LaserLight 530 Laser cutter for education, computer, workbench

Software: Good-Laser LightMaker cutting software

Materials: 3mm basswood, voice-controlled desk lamp drawings

Before starting work

Confirm that the laser is correct and the lens is clean

Make sure the exhaust fan is working properly

Make sure the air assist is turned on

Step 1: Import the file into the Good-Laser LightMaker cutting software and adjust the size, position and settings. Check to make sure everything is working properly.

Step 2: Set processing parameters and cutting path

Step 3: Focus on cutting the wood board

To focus, there are two options:

Auto focus: Click the [Auto] button in the operation panel, click to find focus, click [Border] to determine the processing range after auto focus, and click [Start] to process after confirmation.

If you prefer manual focus: Click the [Manual] button in the operation panel, then click the up, down, left, and right buttons to move the laser head to the appropriate position, and click the [Location] button to determine the starting point of the processing.

Step 4: Remove the cut parts after processing

After processing, press the pop-up platform to remove the workpiece

Step 5: Complete the splicing assembly

Come and try it!

Through this laser cutter for education engraving lamp production course, you not only mastered the application skills of laser cutting technology in the field of woodworking, but also had an in-depth understanding of the working principle of voice-controlled sensors and the basic circuit construction method. Every step from design to finished product is a dual challenge to creativity and technology, and also an artistic practice combining tradition and modernity. We hope that every student can make their own unique voice-controlled desk lamp, enjoy the fun of creation, and also contribute to the development of smart homes.

If you like this project, you can further follow our website www.good-laseredu.com, there are more interesting projects. Thanks for reading!