How to Use 3D Wood Laser Cutter Engraver for Schools to Engrave a Hot Air Balloon Clock?

Introduction

Welcome to use 3D wood laser cutter engraver for schools to engrave a hot air balloon clock! This course aims to guide students to master the basic application of laser cutting technology through practical operation using Good-Laser Light 530, and to design, make and assemble personalized hot air balloon clocks by themselves. Whether you are a DIY enthusiast, a design student, or a friend who is interested in the combination of technology and art, you can find fun and a sense of accomplishment here.

Prepare materials

Hardware: Good-Laser Light 530 3D wood laser cutter engraver, computer, workbench

Software: Good-Laser LightMaker cutting software

Materials: 3mm basswood, hot air balloon clock drawings

Before starting work

Confirm that the laser is correct and the lens is clean

Make sure the exhaust fan is working properly

Make sure air assist is turned on

Step 1: Import the file into the Good-Laser LightMaker cutting software and adjust the size, position and settings. Check to make sure everything is working properly.

Step 2: Set processing parameters and cutting path

Step 3: Focus on cutting the wood board

To focus, there are two options:

Auto focus: Click the [Auto] button in the operation panel, click to find focus, click [Border] to determine the processing range after auto focus, and click [Start] to process after confirmation.

If you prefer manual focus: Click the [Manual] button in the operation panel, then click the up, down, left, and right buttons to move the laser head to the appropriate position, and click the [Location] button to determine the starting point of the processing.

Step 4: Remove the cut parts after processing

After processing, press the pop-up platform to remove the workpiece

Step 5: Complete the splicing assembly

Come and try it!

We showed the production of the hot air balloon clock, but creativity is endless. You can use Good-Laser equipment to create any image or pattern you like. Laser technology makes DIY more convenient and also gives wings to your creativity. Whether it is a gift or an embellishment at home, this hot air balloon clock will bring warmth and unique memories.

If you like this project, you can pay more attention to our website www.good-laseredu.com, which has more interesting projects. Thanks for reading!